Recommend:
To the knowledge base
Knowledge Base document #4341

Connecting FRITZ!Powerline to the FRITZ!Repeater (Mesh Master) via LAN

Connect FRITZ!Powerline to your FRITZ!Repeater (Mesh Master) via LAN to add an additional wireless access point to your home network quickly and easily. This way you will have ideal Wi-Fi reception and high-speed connections to the internet and home network, even when outside the Wi-Fi range of your FRITZ!Repeater.

The FRITZ!Powerline device is integrated into the Mesh during setup and marked with the Mesh symbol in the FRITZ!Repeater user interface. The FRITZ!Powerline device adopts all of the settings from the FRITZ!Repeater, such as Wi-Fi access information and guest access. In the Mesh, your wireless devices automatically connect to the wireless access point that offers the best Wi-Fi reception.

Changes in the Mesh can then be easily made in the FRITZ!Repeater. The FRITZ!Repeater automatically transmits the new settings to the FRITZ!Powerline device. If you still want to access the user interface of the FRITZ!Powerline device, use the password from the FRITZ!Repeater to log in.

Connection scenario for LAN bridge mode

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Powerline device.

1 Loading the factory settings of the FRITZ!Powerline device

To perform the following steps, the FRITZ!Powerline device must be set to factory settings:

  1. Plug the FRITZ!Powerline device into a socket and wait until the Power LED or WLAN LED remains lit or the Connect LED flashes slowly.
  2. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 1260(E) / 1240 AX Connect 15 seconds
    FRITZ!Powerline 1220 / 1210 Connect 10-15 seconds
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security    		 15 seconds
    FRITZ!Powerline 1220E / 1000E Powerline · Security 10-15 seconds
    FRITZ!Powerline 546E / 540E WLAN · WPS und Powerline · Security 10 seconds
    FRITZ!Powerline 530E / 510E Security 12 seconds
    FRITZ!Powerline 520E / 500E Reset 2 seconds
  3. During this process, all of the LEDs flash once. The Power LED or WLAN LED remains lit or the Connect LED flashes slowly as soon as the factory settings have finished loading.

2 Connecting the FRITZ!Powerline device to the home network

  1. Use a network cable to connect the FRITZ!Powerline device to the home network (for example to a FRITZ!Repeater or Mesh Repeater).

3 Setting up the FRITZ!Powerline device as a LAN bridge

  1. Click on 'Access to Home Network' in the user interface of FRITZ!Powerline. If you are asked for a password, enter the password from the type label of the FRITZ!Powerline device or the password for the user interface of the Mesh Master.
  2. Click on the 'Change the Type of Connection' button in the 'Access to Home Network' menu.
  3. Enable the 'LAN bridge' option and click on 'Next'.
  4. Select which IP settings the FRITZ!Powerline device should use and click on 'Next'.
  5. Keep the Wi-Fi settings displayed for the FRITZ!Powerline device and click on 'Next'.
  6. Click on 'Finish' to save the settings.

4 Adding the FRITZ!Powerline device to the Mesh by button

  1. Briefly push the Connect button (see table) on the FRITZ!Powerline device (for about 1 second) and release it again. When you release the button, depending on the FRITZ!Powerline model, several other LEDs flash at the same time.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260(E) / 1240 AX Connect
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    FRITZ!Powerline 546E / 540E WLAN · WPS
  2. Within 2 minutes: Push and hold down the Connect button on the FRITZ!Repeater (Mesh Master) until the Connect LED lights up or starts to flash. Other LEDs may also light up or flash.
  3. The process is complete as soon as the FRITZ!Repeater marks the FRITZ!Powerline device with the Mesh symbol in the Mesh Overview.

5 Adding additional FRITZ!Powerline devices

If you want to set up a new powerline network with additional FRITZ!Powerline devices over your home's wiring, you can easily connect them by pressing a button on the FRITZ!Powerline device that you just set up:

  1. Plug the FRITZ!Powerline device you want to add to the powerline network into an electrical socket near the FRITZ!Powerline device that you already configured.
  2. Wait until the FRITZ!Powerline device is ready for operation and the Connect LED flashes slowly or the Power LED or WLAN LED remains lit.
  3. Briefly push the Connect button (see table) on both of the FRITZ!Powerline devices. You can push the button on whichever FRITZ!Powerline device you want first. When you release the button, the Powerline or Connect LED flashes. Depending on the FRITZ!Powerline model, several other LEDs flash at the same time.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260(E) / 1240 AX / 1220 / 1210 Connect
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    FRITZ!Powerline 1220E / 1000E / 546E / 540E Powerline · Security
    FRITZ!Powerline 530E / 520E / 510E / 500E Security
  4. The process is completed and the FRITZ!Powerline devices are connected to each other as soon as the Powerline LED remains lit.



Help topics:

Related topics:

Language selection