Recommend:
Knowledge Base document #3769
FRITZ!DECT 350
This support document is available for the following products:

Loading the factory settings of FRITZ!DECT 350

Load the factory settings to reconnect the FRITZ! door/window contact or to connect it with a different FRITZ!Box or FRITZ!Smart Gateway. This makes sense if you are going to use the door/window contact at a different location or are planning to pass it on to another user, for example.

You can easily load the factory settings of the door/window contact using the pin included with delivery.

1 Loading the factory settings

Loading the factory settings of FRITZ!DECT 350
  1. Open the housing of FRITZ!DECT 350.
  2. Pick up the pin included with delivery.
  3. Carefully insert the pin into the "Reset" opening inside the housing for at least one second. The LED inside the sensor begins to flash and the factory settings are loaded.

2 Deregistering FRITZ!DECT 350

  1. Click on 'Smart Home' in the FRITZ!Box user interface or in the user interface of the FRITZ!Smart Gateway.
  2. Click on 'Devices and Groups' in the 'Smart Home' menu.
  3. Click on the 'Delete Device' button.
  4. Afterwards, click on the (Delete) button next to the respective device.
  5. Click on the 'Finished' button.
Language selection