Recommend:
To the knowledge base
Knowledge Base document #3554

Setting up FRITZ!Box for use with a Stipte line

The FRITZ!Box is optimally prepared for use with Stipte. Simply connect the FRITZ!Box to the fiber optic modem, select Stipte as the internet service provider in the FRITZ!Box, and configure telephony. The complete FRITZ!Box range of functions for internet, telephony, and smart home is then available to all of the devices in your home network without restriction.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Connecting the FRITZ!Box

  1. Insert one end of a network cable into the 'WAN' port on the FRITZ!Box. Use the network cable supplied with the FRITZ!Box, for example.
  2. Insert the other end of the network cable into the LAN port on the fibre optic modem (ONT, Optical Network Termination).

2 Configuring the internet connection in the FRITZ!Box

  1. Open the FRITZ!Box user interface.
  2. Enter the FRITZ!Box password given on the type label of the FRITZ!Box and click "Log In".
  3. If the wizard for internet access does not start automatically, click "Wizards" and then "Configure the Internet Connection".
    Calling up the FRITZ!Box wizard
  4. Select "Stipte/GlobalXS" from the drop-down list and enable the correct connection type.
  5. Click "Next" and follow the wizard's instructions.
  6. Now the FRITZ!Box checks whether the internet connection can be established. Configuration is complete as soon as the message "The internet connection check was successful" is displayed.

    Important:If the internet connection check fails, your internet access may not have been activated yet. In this case, contact Stipte.

3 Setting up telephony in the FRITZ!Box

Having your login information ready

  1. Have the login information for telephony that you received from Stipte ready.

    Note:Stipte sent you the login information via email after you concluded the contract with them. If you did not receive your login information, contact Stipte.

Configuring phone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click the "New Telephone Number" button.
  4. If shown, enable the option "Internet telephone number" and click "Next".
  5. Select "Stipte / GlobalXS" from the drop-down list.
  6. Enter your telephone number including the area code by "Internet telephone number".
  7. For the "Password", enter the password you received from Stipte.
  8. Enter your area code by "Area code".
  9. Click "Next" and follow the wizard's instructions.

Assigning phone numbers

  1. Click on 'Telephony' in the FRITZ!Box user interface.
  2. Click on 'Telephony Devices' in the 'Telephony' menu.
  3. Click on the (Edit) button for the respective telephony device.

    Important:If the telephony device was not configured yet, click on the 'Configure New Device' button and follow the wizard's instructions.

  4. From the 'Outgoing Calls' drop-down list, select the number to be used by the telephony device for making outgoing calls. If you do not select a phone number, the number entered under 'Telephony > Telephone Numbers > Line Settings' is used for making calls.
  5. Select the phone numbers to which the telephony device should react when you receive calls. You can select up to ten numbers (including the number for outgoing calls).
  6. Click on 'Apply' to save the settings.



Help topics:

Language selection