Recommend:
To the knowledge base
Knowledge Base document #47

DECT range is too low

The range of the DECT connection between a cordless phone and the FRITZ!Box is too low. Even at a short distance from the FRITZ!Box, the connection drops or is interrupted, or you hear an annoying crackling when conducting calls over DECT. The phone may completely lose the DECT connection and show the error 'Search for base' on its display.

Cause

  • Surrounding structural conditions (such as thickness and reinforcement of the walls) as well as other radio equipment such as microwaves and baby monitors influence the quality and thus the range of the DECT connection.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Installing the latest software for your phone

The following steps are only necessary if you are using a FRITZ!Fon:

  1. Install the latest software on the phone.

2 Recharging the phone battery

  1. Fully charge the phone battery. Leave the phone in the charging station for at least 12 hours.

3 Configuring the FRITZ!Box

Disabling 'Reduce DECT field strength'

  1. Click on 'Telephony' in the FRITZ!Box user interface.
  2. Click on 'DECT' in the 'Telephony' menu.
  3. Disable the 'Reduce DECT field strength' option in the 'Radio Field Strength' section.
  4. Click on 'Apply' to save the settings.

Disabling 'DECT Eco'

  1. Click on 'Telephony' in the FRITZ!Box user interface.
  2. Click on 'DECT' in the 'Telephony' menu.
  3. Disable the 'DECT Eco' option in the 'Radio Field Strength' section.
  4. Click on 'Apply' to save the settings.

4 Turning off other base stations

  1. For testing purposes, turn off other base stations in the vicinity of the FRITZ!Box.
  2. If the problem no longer occurs then, turn off the other base station or place the base station further away from the FRITZ!Box.

Now the FRITZ!Box is ideally configured and you will achieve the best possible DECT range between your cordless phones and the FRITZ!Box.

Note:To establish DECT connections over even greater distances or in unfavourable environments, you can increase the DECT range of the FRITZ!Box with a DECT extender. You can use the FRITZ!DECT Repeater 100 as a DECT extender, for example.

Language selection